Perimeter and area of plane figures, circles, surface area and volume.
6 topics
6 experiments
Plus
1. Area of Triangles and Parallelograms
Derive and use area = base × height for parallelograms and ½ × base × height for triangles.
You will learn to
Explain why a parallelogram has the same area as a rectangle
Explain why a triangle is half a parallelogram
Use the perpendicular height correctly
Find a missing base or height
The idea
Area of a parallelogram = base × height, where the height is the PERPENDICULAR distance between the base and the opposite side — not the slanted side. Cutting and sliding turns it into a rectangle of the same base and height. A triangle is half of a parallelogram with the same base and height, so area = ½ × base × height. Any side can be the base, as long as the height is measured perpendicular to it. Rearranging: base = area ÷ height (or 2 × area ÷ height for a triangle).
Key rules
Parallelogram: base × perpendicular height.
Triangle: ½ × base × perpendicular height.
Any side can be the base if the height matches it.
Worked examples
Parallelogram: base 12 cm, height 7 cm
12 × 7
Answer: 84 cm²
Triangle: base 10 cm, height 6 cm
½ × 10 × 6
Answer: 30 cm²
Common mistakes
✗ Using the slanted side as the height.→ The height must be perpendicular to the base.
✗ Forgetting the ½ for triangles.→ A triangle is half a parallelogram.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
2. Area of Trapeziums and Polygons
Derive and use area = ½(a + b) × h for trapeziums and split polygons into simple shapes.
You will learn to
Derive the trapezium formula
Find the area of a trapezium
Find a missing parallel side or height
Find areas of polygons by splitting into triangles and trapeziums
The idea
A trapezium has one pair of parallel sides a and b, with perpendicular distance h between them. Two copies joined make a parallelogram of base (a + b) and height h, so area = ½ × (a + b) × h: "half the sum of the parallel sides × the distance between them". A polygon's area can be found by splitting it into triangles, rectangles and trapeziums (for example along a diagonal) and adding their areas. A rhombus or kite with diagonals d₁ and d₂ has area ½ × d₁ × d₂.
Key rules
Trapezium: ½(a + b) × h.
Rhombus or kite: ½ × d₁ × d₂.
Split polygons into simple shapes and add.
Worked examples
Parallel sides 40 m and 60 m, h = 25 m
½ × 100 × 25
Answer: 1250 m²
Area 90, parallel sides 8 and 12. Height?
90 = ½ × 20 × h
Answer: h = 9
Common mistakes
✗ Multiplying the parallel sides.→ Add them, then take half.
✗ Using a slanting side as the height.→ h is the perpendicular distance between the parallel sides.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
3. Circumference and Area of a Circle
Use C = 2πr and A = πr² for circles and semicircles.
You will learn to
Explain π as circumference ÷ diameter
Find circumference and area
Find radius from circumference or area
Solve problems with semicircles, rings and wheels
The idea
For every circle, circumference ÷ diameter is the same number, π ≈ 22/7 ≈ 3.14. So C = πd = 2πr. Cut a circle into many thin sectors and rearrange them: they form almost a rectangle of length πr and width r, so area A = πr². A semicircle has area ½πr² and perimeter πr + 2r (the curved part plus the diameter). A ring between radii R and r has area π(R² − r²). A wheel moves forward one circumference per turn.
Key rules
C = 2πr = πd; A = πr².
Semicircle perimeter = πr + 2r.
Ring: π(R² − r²).
π ≈ 22/7 ≈ 3.14.
Worked examples
r = 7 cm: circumference
2 × 22/7 × 7
Answer: 44 cm
r = 14 cm: area
22/7 × 14 × 14
Answer: 616 cm²
Common mistakes
✗ Mixing up 2πr and πr².→ Circumference is a length; area is in square units.
✗ Leaving out the diameter in a semicircle's perimeter.→ The straight edge counts too.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
4. Area of Composite Figures and Paths
Find areas of L-shapes, paths around and across fields, and real design problems.
You will learn to
Split composite shapes into rectangles
Find the area of a path (outer − inner)
Find areas of crossing paths
Design spaces with a given area
The idea
A composite figure is made of simpler shapes. Either split it into pieces and add their areas, or take a big shape and subtract the missing parts. A path of width w around a rectangle l × b: outer rectangle (l + 2w) × (b + 2w) minus l × b. Two crossing paths of width w through the middle of an l × b field: l × w + b × w − w × w (the centre square is counted twice). Always check the units and whether "around", "inside" or "across" is meant.
Key rules
Split and add, or take a big shape and subtract.
Path around: (l + 2w)(b + 2w) − lb.
Crossing paths: lw + bw − w².
Worked examples
L-shape: 10 × 8 rectangle with a 4 × 3 corner removed
80 − 12
Answer: 68
Path 2 m wide around 20 m × 15 m
24 × 19 − 20 × 15 = 456 − 300
Answer: 156 m²
Common mistakes
✗ Adding the width only once to each side.→ A path around adds w on both sides.
✗ Counting the crossing square twice.→ Subtract w² once.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
5. Surface Area of Cubes, Cuboids and Cylinders
Find total and lateral surface areas of cubes, cuboids and cylinders using their nets.
You will learn to
Use nets to see surface area as a sum of faces
Find the surface area of a cube and a cuboid
Find the curved and total surface area of a cylinder
Solve painting and wrapping problems
The idea
Unfold a solid into its net and add the areas of the faces. Cuboid l × b × h: total surface area = 2(lb + bh + hl); the four walls alone (lateral surface) = 2h(l + b). Cube of side a: 6a² (lateral 4a²). A cylinder's curved surface unrolls into a rectangle of length 2πr and height h: curved surface area = 2πrh; total = 2πrh + 2πr² = 2πr(h + r). For an open box or tank, leave out the faces that are missing.
✗ Confusing surface area with volume.→ Surface area is in square units.
✗ Including faces that are not there.→ Check: open box, room walls only, label only?
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
6. Volume and Capacity of Cubes, Cuboids and Cylinders
Find volumes, convert between cubic units and litres, and solve tank and container problems.
You will learn to
Find the volume of a cuboid, cube and cylinder
Convert cm³, m³ and litres
Find a missing dimension from the volume
Solve filling, packing and melting problems
The idea
Volume is the space a solid occupies, measured in cubic units. Cuboid: V = l × b × h; cube: V = a³. A cylinder is a stack of circles: V = πr²h (base area × height). Capacity is the volume a container holds: 1 cm³ = 1 mL, 1000 cm³ = 1 L and 1 m³ = 1000 L. Rearrange to find a missing dimension: h = V ÷ (l × b). When a solid is melted and recast, its volume stays the same.
Key rules
Cuboid V = lbh; cube V = a³; cylinder V = πr²h.
1 cm³ = 1 mL; 1 m³ = 1000 L.
Melting and recasting keeps volume.
Worked examples
Tank 2 m × 1.5 m × 1 m
3 m³ × 1000
Answer: 3000 litres
Cube of edge 5 cm
5³
Answer: 125 cm³
Common mistakes
✗ Confusing volume and surface area.→ Volume is in cubic units.
✗ Forgetting to convert m³ to litres.→ 1 m³ = 1000 L.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
Printable worksheets
Worksheets for this theme come with the Plus plan: students print fresh worksheets, with answer keys, for every topic they have opened. Free worksheets are available for the free themes.