Lines, angles, triangles, quadrilaterals, circles, solids, symmetry and constructions.
12 topics
17 experiments
Plus
1. Points, Line Segments, Lines and Rays
Meet the building blocks of geometry and name them correctly.
You will learn to
Describe a point, a line segment, a line and a ray
Name them using letters
Measure line segments
The idea
A point marks an exact position and is named with a capital letter (P). A line segment is the straight path between two points; it has two end points and a fixed length (segment AB). A line goes on forever in both directions (line AB, drawn with arrows at both ends). A ray starts at one point and goes on forever in one direction (ray OA, starting at O). Through two points there is exactly one line.
Key rules
Point: a position
Segment: two end points, fixed length
Ray: one end point
Line: no end points
Exactly one line passes through two points
Worked examples
How many end points does a ray have?
A ray starts at one point and never ends
Answer: 1
How many line segments can you name using points A, B, C on one line?
AB, BC, AC
Answer: 3
Common mistakes
✗ Naming a ray from the wrong end (AO instead of OA).→ A ray is named starting with its end point.
Try the 2 interactive experiments and practise with instant feedback on TutorOps.
Start free
2. Open and Closed Figures; Interior and Exterior
Tell open and closed figures apart and locate the interior and exterior.
You will learn to
Identify open and closed figures
Identify the interior, exterior and boundary
Recognise simple closed curves
The idea
A figure is closed if its boundary meets up with no gaps; otherwise it is open. A simple closed figure does not cross itself. A closed figure divides the plane into three parts: the interior (inside), the boundary (the figure itself) and the exterior (outside). To go from the interior to the exterior you must cross the boundary.
Key rules
Closed: no gaps
Simple closed: does not cross itself
Plane = interior + boundary + exterior
Worked examples
Is the letter C open or closed?
It has a gap
Answer: Open
Is the letter O open or closed?
No gaps
Answer: Closed
Common mistakes
✗ Calling a figure closed when its ends nearly touch.→ Any gap at all makes it open.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
3. Types of Angles
Classify angles as acute, right, obtuse, straight, reflex or complete.
You will learn to
Classify angles by size
Make angles of each type
Spot angle types in everyday objects
The idea
An acute angle is less than 90°. A right angle is exactly 90°. An obtuse angle is between 90° and 180°. A straight angle is exactly 180° (a straight line). A reflex angle is between 180° and 360°. A complete angle is 360° (a full turn).
Key rules
Acute < 90°
Right = 90°
90° < obtuse < 180°
Straight = 180°
180° < reflex < 360°
Complete = 360°
Worked examples
What type is 135°?
Between 90° and 180°
Answer: Obtuse
What type is 200°?
Between 180° and 360°
Answer: Reflex
Common mistakes
✗ Calling 90° acute.→ 90° is exactly a right angle; acute angles are less than 90°.
Try the 2 interactive experiments and practise with instant feedback on TutorOps.
Start free
4. Measuring Angles with a Protractor
Read and draw angles using a protractor.
You will learn to
Place a protractor correctly
Read the correct scale
Draw angles of given sizes
The idea
Place the centre of the protractor on the vertex and line up the zero line with one arm. Read the scale that starts at 0 on that arm and follow it round to the other arm. A protractor has two scales (inner and outer) — always use the one that starts at 0 on your starting arm. To draw an angle, mark the vertex, line up the protractor, put a dot at the required degree and join it to the vertex.
Key rules
Centre on the vertex
Zero line along one arm
Read the scale starting at 0 on that arm
Inner + outer reading = 180°
Worked examples
An arm passes 70 on the inner scale and 110 on the outer. The other arm is at 0 on the inner scale. What is the angle?
Use the inner scale, which starts at 0
Answer: 70°
Draw 45°: where do you put the dot?
At 45 on the scale starting from 0 on the base arm
Answer: At the 45 mark
Common mistakes
✗ Reading the wrong scale (e.g. 130° instead of 50°).→ Check: is the angle acute or obtuse? Pick the reading that fits.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
5. Parallel, Intersecting and Perpendicular Lines
Recognise lines that never meet, lines that cross and lines that meet at right angles.
You will learn to
Identify parallel lines
Identify intersecting lines and their point of intersection
Identify perpendicular lines
The idea
Intersecting lines cross at exactly one point, the point of intersection. Parallel lines are always the same distance apart and never meet, however far they are extended (railway tracks, opposite edges of a ruler). Perpendicular lines intersect at a right angle (90°), like the edges at the corner of a page. We write AB ∥ CD for parallel and AB ⊥ CD for perpendicular.
Key rules
Parallel lines never meet (∥)
Perpendicular lines meet at 90° (⊥)
Two different lines intersect at most once
Worked examples
Two lines meet at a point making a 90° angle. What are they?
Meeting at 90° = perpendicular
Answer: Perpendicular lines
How many points do two different intersecting lines share?
They cross once
Answer: 1
Common mistakes
✗ Thinking lines are not parallel because they are drawn short.→ Imagine extending them — if they would never meet, they are parallel.
Try the 2 interactive experiments and practise with instant feedback on TutorOps.
Start free
6. Triangles and Their Properties
Classify triangles by sides and by angles, and use the angle sum.
You will learn to
Classify triangles by sides
Classify triangles by angles
Use the angle sum property (180°)
The idea
A triangle has 3 sides, 3 angles and 3 vertices. By sides: equilateral (all 3 equal), isosceles (2 equal), scalene (none equal). By angles: acute-angled (all angles less than 90°), right-angled (one angle 90°), obtuse-angled (one angle more than 90°). The three angles of every triangle add up to 180°.
Key rules
Equilateral: 3 equal sides (each angle 60°)
Isosceles: 2 equal sides (2 equal angles)
Scalene: no equal sides
Angle sum = 180°
Worked examples
Two angles are 50° and 60°. Find the third.
180 − 50 − 60
Answer: 70°
Sides 5 cm, 5 cm, 8 cm. What type?
Two equal sides
Answer: Isosceles
Common mistakes
✗ Using 360° as the angle sum of a triangle.→ Triangles: 180°. Quadrilaterals: 360°.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
7. Quadrilaterals
Learn the special quadrilaterals and their properties.
You will learn to
Name parts of a quadrilateral
Know properties of square, rectangle, rhombus, parallelogram and trapezium
Use the angle sum 360°
The idea
A quadrilateral has 4 sides, 4 angles, 4 vertices and 2 diagonals; its angles add up to 360°. Parallelogram: both pairs of opposite sides parallel and equal. Rectangle: a parallelogram with four right angles. Rhombus: a parallelogram with four equal sides. Square: four equal sides and four right angles (a rectangle and a rhombus at once). Trapezium: exactly one pair of parallel sides.
Key rules
Angle sum of a quadrilateral = 360°
Square: equal sides + right angles
Rectangle: right angles
Rhombus: equal sides
Trapezium: one pair of parallel sides
Worked examples
Three angles of a quadrilateral are 80°, 90°, 100°. Find the fourth.
360 − 80 − 90 − 100
Answer: 90°
Is every square a rectangle?
A square has four right angles
Answer: Yes
Common mistakes
✗ Saying a square is not a rectangle.→ A square meets every rule of a rectangle — it is a special rectangle.
Try the 2 interactive experiments and practise with instant feedback on TutorOps.
Start free
8. Circles: Centre, Radius, Diameter and Chords
Draw circles with a compass and learn the parts of a circle.
You will learn to
Draw a circle of a given radius
Identify centre, radius, diameter, chord, arc and circumference
Use diameter = 2 × radius
The idea
A circle is the set of all points at the same distance from a fixed point, the centre. That distance is the radius. A chord joins two points on the circle; the longest chord passes through the centre and is the diameter = 2 × radius. An arc is part of the circle and the circumference is the distance all the way round. With a compass: open it to the radius, put the point at the centre and turn.
Key rules
All points on a circle are one radius from the centre
Diameter = 2 × radius
The diameter is the longest chord
Worked examples
Radius 4.5 cm. Diameter?
2 × 4.5
Answer: 9 cm
Diameter 14 cm. Radius?
14 ÷ 2
Answer: 7 cm
Common mistakes
✗ Opening the compass to the diameter.→ The compass opening is always the radius.
Try the 2 interactive experiments and practise with instant feedback on TutorOps.
Start free
9. Polygons
Name polygons by their number of sides and recognise regular polygons.
You will learn to
Define a polygon
Name polygons with 3 to 10 sides
Recognise regular polygons
The idea
A polygon is a simple closed figure made only of line segments. It is named by its number of sides: triangle (3), quadrilateral (4), pentagon (5), hexagon (6), heptagon (7), octagon (8), nonagon (9), decagon (10). A polygon has as many vertices and angles as sides. A regular polygon has all sides equal and all angles equal.
✗ Calling a circle a polygon.→ Polygons have only straight sides.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
10. Three-Dimensional Shapes: Faces, Edges, Vertices and Nets
Count faces, edges and vertices of solids and match them to nets.
You will learn to
Name common solids
Count faces, edges and vertices
Recognise nets of a cube and cuboid
The idea
Solids take up space. A face is a flat surface, an edge is where two faces meet and a vertex is a corner. Cube: 6 faces, 12 edges, 8 vertices. Cuboid: also 6, 12, 8. Square pyramid: 5 faces, 8 edges, 5 vertices. Triangular prism: 5 faces, 9 edges, 6 vertices. A cylinder, cone and sphere have curved surfaces. A net is a flat shape that folds into a solid; a cube has 11 different nets.
Key rules
Cube/cuboid: 6 faces, 12 edges, 8 vertices
Face + Vertices − Edges = 2 (for these solids)
A net folds into a solid
Worked examples
Faces, edges, vertices of a cube?
6 square faces
12 edges
8 corners
Answer: 6, 12, 8
Check Euler: F + V − E for a cube.
6 + 8 − 12
Answer: 2
Common mistakes
✗ Counting only the edges you can see in a picture.→ Count hidden edges at the back as well.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
11. Line Symmetry and Reflection
Find lines of symmetry and complete symmetrical shapes by reflection.
You will learn to
Recognise line symmetry
Complete a figure so it is symmetrical about a line
Understand reflection as a mirror image
The idea
A figure has line symmetry if a line divides it into two halves that match exactly when folded. That line is the line (or axis) of symmetry; each half is the mirror reflection of the other. In a reflection every point is the same distance from the mirror line as its image, on the other side.
Key rules
A line of symmetry folds a figure onto itself
Reflection: same distance from the mirror, other side
Worked examples
Does the letter A have a line of symmetry?
A vertical line through the top
Answer: Yes, one
A point is 3 squares left of the mirror. Where is its image?
Same distance on the other side
Answer: 3 squares right
Common mistakes
✗ Copying the half instead of reflecting it.→ Squares near the mirror stay near the mirror; far ones stay far.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
12. Geometrical Instruments and Constructing Line Segments
Use a ruler and compass to draw and copy line segments accurately.
You will learn to
Know the instruments in a geometry box
Draw a line segment of a given length
Copy a segment using a compass
The idea
Ruler: draws straight lines and measures length. Compass: draws circles and arcs and transfers lengths. Divider: compares lengths. Set squares: draw right angles and parallel lines. Protractor: measures and draws angles. To draw AB = 5.6 cm, mark A at 0 of the ruler and B at 5.6 cm, then join. To copy a segment PQ, open the compass to PQ, put the point at a new point A and draw an arc to cut a line at B: AB = PQ.
Key rules
Ruler: straight lines and lengths
Compass: circles, arcs, copying lengths
Protractor: angles; set squares: right angles and parallels
Worked examples
Which instrument draws a circle?
Compass
Answer: Compass
A segment is 4.5 cm. Two copies end to end?
4.5 + 4.5
Answer: 9 cm
Common mistakes
✗ Starting to measure at the end of the ruler instead of 0.→ Always place the 0 mark at the start point.
Try the interactive experiment and practise with instant feedback on TutorOps.
Start free
Printable worksheets
Worksheets for this theme come with the Plus plan: students print fresh worksheets, with answer keys, for every topic they have opened. Free worksheets are available for the free themes.